XT30 Male Power Distribution Board Adapter 6 Ports

PCM-0988 is a rigid XT30 male interface expansion module featuring one XT30H-M input and six XT30H-M output connectors arranged in a parallel DC power distribution structure. Unlike female-output XT30 splitters, this configuration creates multiple male connection points for equipment integration, test fixtures, and custom battery-powered platforms.

Internal UL1569/1007 16AWG jumper wires establish direct positive and negative power paths between all connectors, while the LDPE insulation layer and black PVC overmold housing protect the embedded electrical assembly. The board-style construction eliminates external cable sections and maintains fixed connector spacing through an integrated mounting structure. PCM-0988 is applied in RC models, robotics, lithium battery systems, and electrical test equipment requiring XT30 male interface expansion.

Applications :

Lithium Battery Systems

Used for parallel DC power routing from a single battery source to multiple XT30 male-connected devices or modules.

Electrical Test Fixtures

Provides fixed XT30 power access points for laboratory testing platforms, prototype verification, and equipment development setups.

Robotics Power Integration

Supports distributed power connection in robotic platforms, mobile equipment, and small electric systems with XT30-based interfaces.

RC and FPV Power Platforms

Provides multiple XT30 male connection points for RC vehicles, FPV systems, and battery-powered models requiring compact DC power distribution.

Features :

Electrical Inspection Process

Each unit undergoes 100% open, short, and miswire testing, with insulation resistance and withstand voltage verification.

Fixed Mounting Interface

Integrated Φ3.5 fixing holes and Φ6.0 positioning holes allow mechanical attachment to panels, brackets, or equipment frames.

Parallel DC Bus Configuration

All XT30 terminals share common positive and negative power paths, enabling direct DC power splitting without signal transmission.

XT30 Male Connector Expansion

One XT30H-M input and six XT30H-M outputs create a high-density male interface distribution structure for multiple connection points.

Rigid Overmolded Module Structure

Connector assemblies and internal conductors are encapsulated with PVC overmold material, replacing flexible cable-based splitter designs.

16AWG Embedded Power Wiring

UL1569/1007 16AWG jumper wires are integrated inside the module to support higher current routing compared with smaller XT30 distribution versions.

Equipment-Level XT30 Power Expansion

The male to male configuration provides additional XT30 male connection points for custom power architectures where connector accessibility and fixed positioning are required.

Specification :

Drawing :

FAQs :
 

Does PCM-0988 support signal transmission?

No. PCM-0988 is designed only for DC power distribution and does not provide signal routing.

How many XT30 connectors are included in PCM-0988?

PCM-0988 contains seven XT30H-M connectors: one input connector and six output connectors.

Are the six output ports isolated from each other?

No. All output ports are electrically parallel. The positive terminals and negative terminals are shared across all channels.

Is PCM-0988 a cable splitter?

No. PCM-0988 is an overmolded power distribution board adapter. It uses embedded jumper wiring inside a rigid housing instead of external flexible cables.

What is the difference between XT30 male and XT30 female distribution boards?

XT30 female distribution boards provide mating points for external XT30 male devices, while male to male versions like PCM-0988 expand the number of available XT30 male interfaces for equipment-side power layouts.