TE GEMnet to MATEnet Quad Automotive Ethernet Cable Female to Female
Keywords :
TE 1-2386629-4 to 2302510-9 Cable Assembly
Specification :
4 In 1 GEMnet to MATEnet Automotive Ethernet Cable
Performance :
PCM-ZC-0188
Category :
GEMnet
Detail
TE GEMnet to MATEnet Quad Automotive Ethernet Cable Female to Female
PCM-ZC-0188 is a Quad GEMnet to MATEnet automotive Ethernet cable assembly designed to connect a TE GEMnet Quad interface with four individual MATEnet Ethernet devices. The main connector uses TE 1-2386629-4 GEMnet Jack Z Code, integrating four differential Ethernet channels in one 8 Pin interface. Each channel is routed to a separate TE 2302510-9 MATEnet Jack Z Code connector.
The harness uses LEONI Dacar 686-3 automotive Ethernet cable and maintains independent channel mapping from the Quad GEMnet connector to the four MATEnet branches. It is intended for ADAS domain controllers, vehicle cameras, sensors, ECU networking and automotive Ethernet test systems. The branch connectors use dedicated double wall heat shrink tubing for mechanical protection and strain relief.
Applications :
ECU Networking
Connects GEMnet equipped ECUs with multiple MATEnet automotive Ethernet devices.
Vehicle Sensors
Connects multiple Ethernet sensors to a Quad GEMnet interface in vehicle networking systems.
ADAS Cameras
Provides four independent Ethernet connections between a domain controller and camera modules.
Automotive Test Benches
Used for ECU validation, connector compatibility testing and automotive Ethernet development equipment.
ADAS Domain Controllers
Provides a 1 to 4 Ethernet connection between a Quad GEMnet controller interface and four MATEnet based devices.
Key Features :
Quad GEMnet Input
Uses TE 1-2386629-4 GEMnet Jack Z Code with four integrated differential Ethernet channels.
Four MATEnet Outputs
Each Ethernet channel terminates at an individual TE 2302510-9 MATEnet Jack Z Code connector.
Continuous Shield Grounding
The connector shells are interconnected to maintain shield continuity across the four Ethernet channels.
DC to 10 GHz Frequency Range
Designed for high frequency automotive Ethernet applications using LEONI Dacar 686-3 Ethernet cable.
Automotive Wide Temperature Range
Specified for operation from -40°C to +105°C for automotive electronic and vehicle networking environments.
100 Ohm Differential Impedance
The cable assembly uses a nominal 100 Ohm differential impedance for automotive Ethernet signal transmission.
Independent Channel Mapping
The four differential channels are routed individually from GEMnet Pins 1 to 8 to the corresponding MATEnet branch.
Specifications :
| Product Type | Quad GEMnet to 4 Way MATEnet Automotive Ethernet Cable |
| Part Number | PCM-ZC-0188 |
| Main Connector | TE 1-2386629-4 GEMnet Jack Z Code |
| Branch Connectors | 4 × TE 2302510-9 MATEnet Jack Z Code |
| Configuration | 1 to 4 |
| Cable | LEONI Dacar 686-3 |
| Differential Impedance | 100 Ohm Nominal |
| Frequency Range | DC to 10 GHz |
| Hi Pot | 500 VRMS Minimum |
| Cable Retention | 110 N Minimum |
| Operating Temperature | -40°C to +105°C |
Drawing :
FAQ :
What connectors are used on PCM-ZC-0188?
The main connector is TE 1-2386629-4 GEMnet Jack Z Code, while the four branch connectors are TE 2302510-9 MATEnet Jack Z Code.
What is a GEMnet to MATEnet automotive Ethernet cable?
A GEMnet to MATEnet cable connects a Quad TE GEMnet interface containing four Ethernet channels to four individual TE MATEnet interfaces.
Can PCM-ZC-0188 be used for ADAS applications?
Yes. The cable is designed for applications such as ADAS domain controllers, vehicle cameras, Ethernet sensors, ECU networking and automotive Ethernet test systems.
Keywords: