Rosenberger 4 In 1 Mini Fakra Female to 4x Fakra Male Cable
Keywords :
Rosenberger AMK12D-1M4Z5-Z to 59Z114-000-Z
Specification :
4 Way Mini FAKRA Cable
Performance :
PCM-ZC-0197
Category :
Fakra
Detail
Rosenberger 4 In 1 Mini Fakra Female to 4x Fakra Male Cable
PCM-ZC-0197 is a Mini FAKRA splitter cable designed to convert one Quad Mini FAKRA Z Code interface into four standard FAKRA Z Code connections. The assembly uses a Rosenberger AMK12D-1M4Z5-Z Mini FAKRA Jack on the input side and four 59Z114-000-Z FAKRA Z Code Plugs on the output side, providing four separate coaxial signal paths in a compact 1 to 4 configuration.
Built with LEONI DACAR 302-4 automotive coaxial cable, this Mini FAKRA to FAKRA cable assembly is intended for internal automotive electronic systems where a compact multi-channel connection is required.
Applications :
ADAS Camera Systems
Breaks out a Quad Mini FAKRA interface into four standard FAKRA connections for GMSL1 or GMSL2 camera systems.
Automotive ECU Test Fixtures
Provides a compact multi-channel coaxial connection for automotive electronic system development and laboratory testing.
Infotainment and TCU Systems
Converts a high density Quad Mini FAKRA interface into four standard FAKRA connections for internal antenna or signal routing.
Surround View Domain Controller
Provides four separate coaxial paths between a compact controller side Mini FAKRA interface and individual camera connections.
Key Features :
Automotive Temperature Range
The cable assembly is specified for an operating temperature range of -40°C to +105°C.
Z Code Keying
The Mini FAKRA and standard FAKRA connectors use Z Code keying for the specified mating configuration.
Quad Channel Breakout
One Quad Mini FAKRA Jack provides four separate coaxial outputs through standard FAKRA Z Code Plugs.
LEONI DACAR 302-4 Cable
Each coaxial path uses LEONI DACAR 302-4 automotive coaxial cable for compact multi-channel automotive interconnection.
50 Ohm Impedance
The coaxial signal paths are designed around a nominal 50 Ohm impedance for automotive RF and high speed signal transmission.
DC to 3GHz Frequency Range
The assembly is specified for signal frequencies from DC to 3GHz, suitable for its intended GMSL1 and GMSL2 automotive applications.
150 mm Short Branch Design
Each branch is specified at 150 ± 5 mm from the P1 connector tail to the corresponding output connector tail for compact internal routing.
Specifications :
| Part Number | PCM-ZC-0197 |
| Configuration | 1 to 4 Mini FAKRA splitter |
| P1 Connector | Rosenberger AMK12D-1M4Z5-Z |
| P1 Type | Quad Mini FAKRA Z Code Jack |
| P2 to P5 Connectors | Rosenberger 59Z114-000-Z |
| P2 to P5 Type | FAKRA Z Code Plug |
| Cable | LEONI DACAR 302-4 |
| Impedance | 50 Ohm nominal |
| Frequency Range | DC to 3GHz |
| VSWR | ≤ 1.800 |
| Hi-Pot | ≥ 800 VRMS |
| Cable Retention | ≥ 110N |
| Operating Temperature | -40°C to +105°C |
Drawing :
Keywords: