M12 bus termination resistor for field bus networks PROFIBUS DeviceNet and CANopen
DeviceNet CANopen Micro-C termination resistors M12 female
Terminating resistor M12 for DeviceNet CANopen PROFIBUS
DeviceNet Drop M12 plug with terminator resistor
DeviceNet CANopen M12 terminator CAN-Bus
DeviceNet Micro-C Termination Resistor
M12 Terminating resistor for PROFIBUS
Bus termination resistor
Temperature range: -40 °C…+80 °C
Internal resistor 120 Ω, 1/2 W
Type: M12 × 1 female connector, 5-pin
For use in CAN (DeviceNet™, CANopen) applications
Protection class: NEMA 1, 3, 4, 6P and IEC IP68, IP69K
Rated voltage: 10…30 VDC (max. 7.6 VDC on pins with resistor)
DeviceNet Micro-C Termination Resistors are essential in preventing impedance in cable ends.
They are installed between Can+ and Can-, not to ground. Once installed to the end of a Devicenet Micro-C cable, their purpose is to stop the characteristic impedance of the wire from increasing.
In this way, they serve to help protect the data transmission signal and ensure that the equipment is functioning properly. Premier Cable carries the Micro-C termination resistors in both male and female ends.
NMEA 2000 is a low-cost data network operating at 250 Kbps and utilizing the Controller Area Network (CAN) Integrated Circuit
It allows multiple electronic devices to be connected together on a common channel for the purpose of easily sharing information