MIL-DTL-5015 MS3106-14S-9S Mil-Spec Cable 2 Pin Female to Female

PCM-1004 is a MIL-C-5015 cable assembly designed for two wire sensor and accelerometer connections. It uses straight MS3106-14S-9S 2 Pin female connectors at both ends, providing a direct A to A and B to B connection between the two mating interfaces. The cable uses two 18 AWG conductors with an integrated shield and a 5.2 mm black TPU outer jacket. The shield is electrically continuous between both connector ends to maintain the intended shielding path. 

The connector uses a 5/8-24 UNF threaded coupling interface, while the cable assembly is protected by an LDPE inner mold and black TPU overmold. This MS3106-14S-9S cable is intended for ICP/IEPE accelerometers, two wire sensors and MIL-C-5015 based industrial equipment where a shielded signal connection is required.

Applications :

Accelerometer Connection

Used to connect ICP/IEPE accelerometers with a two wire interface.

Two Wire Sensors

Provides a direct shielded cable connection for two wire sensor systems.

MIL-C-5015 Equipment

Designed for equipment requiring a 2 Pin MS3106-14S-9S cable assembly.

Industrial Sensor Equipment

Suitable for sensor wiring in industrial equipment using MIL-C-5015 interfaces.

Instrumentation Systems

Used for shielded sensor signal and power connections in industrial instrumentation.

Key Features :

Continuous Shield Path

The shield is connected from P1-S to P2-S, with no floating shield connection.

18 AWG 2 Core Cable

Uses two 18 AWG conductors with an integrated shield for two wire sensor connections.

5/8-24 UNF Coupling

The MS3106-14S-9S connector interface uses a 5/8-24 UNF threaded coupling configuration.

2 Pin Female Configuration

Both ends use straight MS3106-14S-9S 2 Pin female connectors for direct cable-to-cable connection.

TPU Overmold Protection

LDPE inner molding and black TPU 45P overmolding provide mechanical protection and strain relief around the connector transition.

Specifications :

Drawing :