Micro DB25 to DB25 Cable Compatible Molex 83424 Series Pickering A025CFR-025DMR-5A180

PCM-S-0790 is a Micro DB25 to standard DB25 cable assembly designed for industrial equipment requiring a compact D-Sub connection interface.

The cable features a standard DB25 male connector on one end and a Micro DB25P female connector on the other end, providing a space-saving connection between compact devices and conventional DB25 systems.

Built with UL2464 28AWG 25-core shielded cable, the assembly integrates aluminum foil shielding, drain wire, and braided shielding to improve electromagnetic interference protection. The 25 pin straight through wiring supports RS232, RS422, RS485, and general parallel signal transmission applications.

Compatibility :

① Molex 834249060
Commercial Micro-D Cable  Assembly, 25 CMD-to-25 Pin D-Subminiature Female to Male 0.46m

② Molex 834249061
Commercial Micro-D Cable  Assembly, 25 CMD-to-25 Pin D-Subminiature Female to Male 0.91m

③ Molex 834249062
Commercial Micro-D Cable  Assembly, 25 CMD-to-25 Pin D-Subminiature Female to Male 1.83m
④ Molex 834249067
Commercial Micro-D Cable  Assembly, 25 CMD-to-25 Pin D-Subminiature Female to Male 2.5m

⑤ Pickering A025CFR-025DMR-5A180

Applications :

Legacy Industrial Communication Equipment

Compatible with industrial devices using RS232, RS422, RS485, or parallel signal transmission through 25-pin D-Sub interfaces.

Machine Vision Equipment

Applied in industrial cameras, vision controllers, and inspection systems where compact and shielded signal connections are required.

Embedded Control Systems

Designed for compact controllers, gateways, and electronic modules where standard DB25 connectors require reduced installation space.

Test & Measurement Systems

Suitable for data acquisition equipment, diagnostic instruments, electronic testers, and measurement devices using 25 pin D-Sub interfaces.
Industrial Automation Equipment

Used for PLC systems, servo controllers, industrial computers, and control modules requiring Micro DB25 serial or parallel signal connections.

Features :

Industrial Overmolded Cable Construction

Black PVC injection molded strain relief protects solder joints and reduces mechanical stress during equipment installation.

Space-Saving Micro D-Sub Design

The compact Micro DB25 connector reduces installation space requirements for embedded equipment and control systems.

Secure Connector Locking Structure

Uses different screw configurations: 4-40 UNC screws for standard DB25 connector and 2-56 screws for Micro DB25 connector.

UL2464 Double Shielded Cable Structure

Uses 28AWG 25-core cable with aluminum foil, drain wire, and braided shielding to improve EMI protection in industrial environments.
Micro DB25 to Standard DB25 Interface Conversion

Features a Micro DB25P female connector and standard DB25 male connector for connecting compact equipment with conventional D-Sub interfaces.

Specification :

Drawing :