IP67 FAKRA to Straight SMB Flange Mount Cable Female to Female 

PCM-ZC-0042 Automotive Camera Cable is a compact 500 mm coaxial jumper developed for signal connections between vehicle electronic modules and camera related interfaces. Its straight SMB female connector creates a fixed, forward facing interface at the ECU or module panel, while the Rosenberger 59Z163-003-Z FAKRA Z Code jack connects the harness side to a compatible automotive interface.

A LEONI Dacar 462 50 Ohm coaxial cable forms the signal path between the two connector systems. The straight SMB geometry makes this version suitable for layouts where the cable can extend directly behind the panel rather than turning immediately after the connection point. With IP69 protection at the SMB interface and IP67 at the FAKRA interface, the assembly is designed for ADAS camera jumpers and vehicle RF connections exposed to automotive operating conditions.

Applications :

Camera Signal Jumper

Provides a short coaxial link within compatible automotive camera signal paths.

ADAS Camera Connection

Connects camera related FAKRA interfaces with SMB equipped vehicle electronics.

ECU Interface Extension

Creates a 500 mm connection between an ECU panel interface and the associated automotive coaxial harness.

Vehicle Electronic Modules

Provides a 50 Ohm signal path between SMB and FAKRA Z Code interfaces used within compatible vehicle electronics.

Exposed Module Installations

IP69 protection at the SMB interface supports module installations where the connector may encounter water spray and demanding vehicle conditions.

Key Features :

500 mm Jumper Length

The standard PCM-ZC-0042 configuration provides a compact 500 mm connection with a ±15 mm tolerance.

50 Ohm Signal Path

LEONI Dacar-462 coax maintains the specified 50 Ohm characteristic impedance between the two connector interfaces.

Automotive Temperature Range

The assembly operates from -40°C to +105°C and provides a specified axial retention force of at least 110 N after assembly.

Original Rosenberger FAKRA

The harness uses a specified Rosenberger 59Z163-003-Z FAKRA Z Code jack rather than an unspecified equivalent connector.

Straight Cable Entry

The SMB connector uses a straight geometry for installations where the cable is routed directly away from the module interface.

Fixed SMB Panel Interface

The SMB5.0 female connector provides a flange mounted interface for integration into compatible ECU and electronic module panels.

Dual Environmental Protection

The SMB side is specified to IP69 and the FAKRA Z Code side to IP67 for use under demanding automotive environmental conditions.

Specifications :

Drawing :

FAQs :
 

Which Rosenberger connector is used?

The FAKRA side uses the specified Rosenberger 59Z163-003-Z FAKRA Z Code jack. The other end uses an SMB5.0 straight female connector.

Can the cable be installed in exposed vehicle areas?

The SMB interface is specified to IP69 and the FAKRA interface to IP67. The assembly also operates from -40°C to +105°C, supporting demanding automotive installation environments within the stated specifications.

Why does PCM-ZC-0042 use a straight SMB connector?

The straight SMB configuration allows the cable to leave the module interface in line with the connector axis. This arrangement is suitable for installations where sufficient clearance is available behind the mounting panel.

Is PCM-ZC-0042 suitable for ADAS camera connections?

It is designed for ADAS camera signal jumper and automotive RF interconnection applications. Actual equipment compatibility should be verified against the connector interface, impedance, frequency, and system requirements.

What is an automotive camera jumper cable?

An automotive camera jumper is a short coaxial assembly used to bridge camera related interfaces, electronic modules, or sections of the vehicle harness. PCM-ZC-0042 provides a 500 mm connection between SMB and FAKRA Z Code interfaces.