HPDB68 Male to Male 68 Pin SCSI-3 Cable Compatible PCL-10168
Keywords :
SCSI-68 Cable
Specification :
68 Pin SCSI-3 Shielded Cable
Performance :
PCM-S-0756
Category :
SCSI Cable
Detail
HPDB68 Male to Male 68 Pin SCSI-3 Cable Compatible PCL-10168
PCM-S-0756 HPDB68 Male to Male Cable Assembly is a 68-pin high-density D-Sub signal cable designed for industrial automation, data acquisition, test equipment, and SCSI-3 interface applications.
The cable uses two HPDB68 male connectors with 2-56UNC screw locking hardware to provide secure mechanical retention between connected devices. The internal 28AWG 34-pair shielded cable structure combines aluminum foil shielding, drain wire, and braided shielding to support stable multi-channel signal transmission in industrial environments.
Each connector follows a straight-through pin assignment from Pin 1 to Pin 68, while the cable shield is connected to both connector shells to maintain EMC protection. With UL20276 cable construction, gold-plated contacts, and PVC overmolded strain relief, PCM-S-0756 is suitable for industrial I/O systems, DAQ equipment, automated test platforms, and Advantech PCL-10168 compatible applications.
Compatible Devices :
| Part No | Length | Compatible With |
| PCM-S-0756-1M | 1000±30 | Advantech PCL-10168-1E |
| PCM-S-0756-2M | 2000±30 | Advantech PCL-10168-2E |
PCM-S-0756 is designed for equipment using:
- HPDB68 female interface
- 68-pin High Density D-Sub connector
- SCSI-3 68-pin interface configuration
Applications :
- Data acquisition (DAQ) systems
- Automated test equipment (ATE)
- SCSI-3 storage interface systems
- Laboratory measurement instruments
- Industrial automation control equipment
- Legacy industrial computer interface replacement
- Semiconductor inspection and electronic testing equipment
Features :
- Gold-plated contacts provide stable electrical connection performance
- UL20276 cable jacket with aluminum foil and braided shielding structure
- 28AWG 34-pair shielded cable supports high-density signal transmission
- Black PVC overmolded connector housing protects cable termination points
- Available in 1m and 2m standard lengths for industrial equipment integration
- Dual HPDB68 male connectors for direct device-to-device signal connection
- 2-56UNC screw locking hardware improves connector retention under vibration
- 68-pin straight-through wiring maintains accurate pin mapping between both ends
Specification ：
| Product Type | HPDB68 Male to Male Shielded Cable Assembly |
| Connector A | HPDB68 Male |
| Connector B | HPDB68 Male |
| Connector Gender | Male to Male |
| Pin Count | 68 Pin |
| Connector Standard | High Density D-Sub / SCSI-3 68 Pin |
| Cable Type | 28AWG 34PAIR + AM + D + B Shielded Cable |
| Cable Standard | UL20276 |
| Cable Outer Diameter | 9.0mm |
| Cable Structure | 34 Pair Differential Signal Cable |
| Shielding Structure | Aluminum Foil + Drain Wire + Braided Shield |
| Connector Locking | 2-56UNC Nickel-Plated Screw |
| Connector Housing | Black Insulation Housing |
| Overmolding | Black PVC Injection Molded |
| Compatible Part Number | Advantech PCL-10168-1E / PCL-10168-2E |
| Insulation Resistance | ≥20MΩ @ DC300V |
| Contact Resistance | ≤3Ω MAX |
Drawing :
FAQs :
What does HPDB68 Male to Male mean?
HPDB68 Male to Male means both ends of the cable use HPDB68 male connectors. The cable is used to connect two devices equipped with compatible HPDB68 female ports.
What is an HPDB68 cable?
An HPDB68 cable is a 68-pin High Density D-Sub cable assembly commonly used for SCSI-3 interfaces, industrial automation equipment, data acquisition systems, and test measurement applications.
What is the difference between HPDB68 and HPCN100?
HPDB68 uses a 68-pin High Density D-Sub connector, while HPCN100 uses a 100-pin MDR/Half-Pitch Centronics connector. They have different mechanical structures and cannot directly replace each other.
Keywords: