Right Angle USB 2.0 and USB 3.1 Type-C Round Mount Panel Cable
Keywords :
Flush Mount USB Cable
Specification :
USB Type C Panel Extension
Performance :
PCM-0214
Category :
Round Panel Mount Cable
Detail
Right Angle USB 2.0 and USB 3.1 Type-C Round Mount Panel Cable
PCM-0214 integrates a USB Type-C female connector and a USB Type-A female connector into a single flush-mount panel assembly. The panel side is secured with a threaded mounting body and locking nut, while the rear side terminates into separate USB Type-C and USB Type-A male connectors.
A right-angle cable outlet routes both cable branches parallel to the panel surface, making the assembly easier to install in equipment with limited internal depth. The two USB interfaces are wired as independent USB 2.0 channels and use shielded UL2725 cable with grounded connector shells throughout the assembly. Common applications include industrial control systems, vehicle dashboards, embedded computers, instrumentation equipment, and medical devices requiring externally accessible USB ports.
Specifications :
| Part Number | PCM-0214 |
| Interface 1 | USB Type-C Male |
| Interface 2 | USB Type-A Male |
| Signal Standard | USB 2.0 |
| Data Rate | Up to 480Mbps |
| Type-C Function | USB 2.0 + CC1 / CC2 Detection |
| Cable Length | 1000±30mm |
| Cable Construction | UL2725 Shielded |
| Shielding | Braided Shield + Grounded Shells |
| Cable Exit Direction | 90° Right Angle |
| Panel Cutout Diameter | Ø26.3mm |
| Insulation Resistance | ≥10MΩ |
| Withstanding Voltage | DC 300V |
| Contact Resistance | ≤3Ω |
Key Features :
Dual Ports
Integrates USB Type-C and USB Type-A connectors within a single panel-mounted assembly.
Shielded Construction
Braided shielding and grounded connector shells help suppress EMI and improve signal stability.
Flush-Mounted Interface
Creates a clean external access point while maintaining a low-profile installation on the equipment panel.
Independent USB Channels
Separate USB Type-C and USB Type-A pathways prevent signal interaction between connected devices.
Integrated Mounting Architecture
Threaded mounting body and locking nut secure the assembly through a standard panel opening without additional brackets.
Right-Angle Exit
Side-exit cable routing minimizes rear-panel clearance requirements and simplifies cable management inside compact equipment.
Industrial Wiring Configuration
UL2725 cable construction, molded strain relief, and full grounding architecture support long-term deployment in industrial and commercial systems.
Applications :
Control Cabinets
Reduces panel opening requirements while maintaining multiple USB interface options.
Test Instruments
Supports USB access points on measurement systems, analyzers, and laboratory equipment.
Vehicle Dashboards
Adds external USB connectivity to automotive consoles, control panels, and vehicle electronics.
Medical Equipment
Used for operator-accessible USB connections on diagnostic, monitoring, and imaging systems.
Embedded Systems
Allows USB expansion in compact electronics where installation depth and cable routing are restricted.
Industrial Computers
Creates accessible front-panel USB interfaces for industrial PCs, HMIs, and embedded computing platforms.
Drawing :
FAQs :
Is the mounting nut removable?
Yes. The locking nut is supplied separately for installation through a Ø26.3mm panel opening.
Does the Type-C port support CC detection?
Yes. CC1 and CC2 pins are connected to support device attachment and orientation recognition.
Can both USB ports be used at the same time?
Yes. The USB Type-C and USB Type-A channels are independently wired and can operate simultaneously.
Is this cable USB 3.1 compatible?
The Type-C connectors use USB 3.1 mechanical interfaces, but the internal wiring supports USB 2.0 signaling up to 480Mbps.
Does this cable support USB Power Delivery?
No. The assembly supports standard USB 2.0 power distribution and device detection but does not include PD functionality or an E-Marker chip.
Keywords: