MT60 Male to Female Panel Mount Power Cable
Keywords :
MT60 3 Pin Power Cable
Specification :
MT60 Battery Connector Cable
Performance :
PCM-0814
Category :
Round Panel Mount Cable
Detail
MT60 Male to Female Panel Mount Power Cable
PCM-0814 is a MT60 3-pin panel mount power cable assembly designed for high-current DC power transmission in battery systems, energy storage equipment, and electric mobility applications. The structure combines a panel-mounted MT60H-F female connector with a matching MT60H-M male plug. The female side is fixed into an enclosure using a locking nut, allowing the system to separate fixed installation from external power connection points.
This type of design is typically used where frequent plug-in cycles and stable high-current delivery must coexist under vibration and outdoor operating conditions. The assembly is built around UL2464 16AWG conductors, ensuring controlled voltage drop and stable current flow in continuous load scenarios.
Specifications :
| Part Number | PCM-0814 |
| Connector A | MT60H-F (Panel Mount Female) |
| Connector B | MT60H-M (Male Plug) |
| Cable Type | UL2464 PVC insulated cable |
| Conductor | 3-core |
| Wire Gauge | 16AWG |
| Outer Diameter | 6.5 mm |
| Length Options | 300 ±15 mm / 800 ±20 mm |
| Mounting Type | Panel mount with hex locking nut |
| Contact Resistance | ≤30 mΩ |
| Insulation Test | DC 300V, ≥10MΩ |
Key Features :
Injection Molded Strain Relief Structure
Overmolded transition zone reduces mechanical stress at cable exit points.
High Current MT60 Power Interface
Designed for stable DC power delivery in 30A-class battery and energy systems.
16AWG Low Resistance Conductors
Reduces voltage drop under continuous load conditions in energy storage and mobility systems.
Dual Protection Construction
Combination of molded housing and heat-shrink reinforcement improves long-term durability in vibration environments.
Panel Mount Structural Design
The female connector is fixed through enclosure wall using locking nut, enabling external power access without internal exposure.
Applications :
- Outdoor Power Supply Units
- Electric Vehicle Battery Packs
- Energy Storage Systems (ESS)
- E-Bike / E-Scooter Power Systems
- Portable Industrial Power Equipment
- Robotics Power Distribution Modules
- High Power DIY / RC / Model Systems
- Industrial Charging Interface Extensions
Drawing :
FAQs :
Q1: How much current can MT60 handle?
Typically up to 30A depending on system conditions and wire gauge.
Q2: Is MT60 suitable for outdoor use?
Yes, when combined with proper enclosure sealing and strain relief design.
Q3: What is the benefit of panel mount MT60 design?
It allows external power access while keeping wiring inside the enclosure protected.
Q4: Why use 16AWG wire in MT60 cables?
16AWG provides a balance between flexibility and low-resistance current transmission.
Q5: What is an MT60 panel mount cable used for?
It is used for high-current DC power connection in battery systems, EV devices, and energy storage equipment.
Keywords: