M12 to DB15 Power I/O Trigger Cable Cognex CBL-05P2-S2
Keywords :
Cognex CBL-05P2-S2 Cable
Specification :
M12 to DB15 Vision Cable
Performance :
PCM-S-0583
Category :
Cognex Vision Cable
Detail
M12 to DB15 Power and I/O Trigger Cable Compatible with Cognex CBL-05P2-S2
Ensure high-precision data synchronization for your Cognex DS1000 series 3D displacement sensors with the PCM-S-0583 interface cable. This specialized M12 to DB15 cable is the professional alternative to the Cognex CBL-05P2-S2 and CBL-20P2-S2. It provides an integrated solution for power input, high-speed I/O triggering, image acquisition, and critical encoder signal transmission. Designed for the rigorous demands of machine vision, it guarantees zero-latency signal feedback in complex automation environments.
Specifications:
Part Number | PCM-S-0583 |
Connector A | M12 A-coded 12 Pin Female |
Connector B | DB15P Male |
Signal Support | Power, Trigger, Image Acquisition, Encoder |
Cable Length | 5 Meters, 20 Meters |
Material | Overmold Blue PVC |
Wire Gauge | 24 AWG |
OD | 7.3mm |
Key Features & Engineering Performance:
Plug-and-Play Compatibility: 1:1 replacement for Cognex CBL-05P2-S2.
Multiple Length Options: Available in 5m Standard and 20m Long-reach versions.
Comprehensive Signal Support: Handles power, I/O trigger, and encoder outputs.
Robust DB15 Connector: Features thumb screws for secure vibration-proof connection.
Superior EMI Protection: Multi-layer shielding prevents crosstalk between encoder phases.
High-Flex Construction: Built with industrial-grade materials for continuous movement in 3D scanning.
Device Compatibility & Application:
The PCM-S-0583 is specifically engineered for the Cognex DS1000 Series 3D Displacement Sensors, providing the essential link for:
Cognex DS1050
Cognex DS1101
Cognex DS1300
Industrial Encoders: Synchronizing sensor acquisition with conveyor or robotic motion.
FAQs:
Q: Is the DB15 connector compatible with standard breakout boards?
A: Yes, the DB15 male connector follows the standard Cognex pin mapping, allowing it to interface directly with Cognex vision controllers or custom I/O breakout modules.
Q: Can I use this cable to replace the Cognex CBL-20P2-S2?
A: Yes. The PCM-S-0583 is fully compatible with both the 5-meter CBL-05P2-S2 and the 20-meter CBL-20P2-S2 versions, maintaining identical pinouts for all DS1000 sensors.
Q: Does this cable support high-speed encoder feedback?
A: Absolutely. The internal wiring is optimized for high-speed differential signals, ensuring that encoder outputs from the DS1000 series are transmitted without pulse loss or timing jitter.
Drawing:
Keywords: