M12 8 Pin to DB15 I/O Cable for In-Sight 5000
Keywords :
M12 8 Pin to DB15 Cable
Specification :
In-Sight 5000 I/O Cable
Performance :
PCM-S-0588
Category :
Cognex Vision Cable
Detail
M12 8 Pin to DB15 I/O Cable for In-Sight 5000
Optimize your Cognex In-Sight 5000 series vision systems with the PCM-S-0588, a professional-grade M12 8 Pin to DB15 I/O cable. Specifically engineered as a high-fidelity replacement for the Cognex CCB-84901-090x series, this cable provides the critical link between your In-Sight 5600, 5705, or Line Scan cameras and the CIO-MICRO, CIO-MICRO-CC I/O modules. By combining stable DC power delivery with precision GPIO and trigger signal transmission, it ensures your high-speed inspection lines operate with absolute synchronization and zero downtime.
Specifications:
Part Number | PCM-S-0588 |
Connector A | M12 A-coded 8 Pin Female |
Connector B | DB15P Male |
Compatible Models | In-Sight 5000 Series |
Module Support | CIO-MICRO, CIO-MICRO-CC |
Connector Material | Overmold Yellow PVC |
Wire Gauge | 24 AWG |
OD | 7.3mm |
Key Features & Engineering Design:
1:1 Pinout Compatibility: Direct replacement for CCB-84901-0901-02.
Precision M12 Connector: A-coded 8-pin female with gold-plated contacts.
Vibration-Proof DB15: Male connector equipped with industrial thumb screws.
Integrated Power & I/O: Simplifies wiring by handling power, trigger, and GPIO.
Broad Length Range: Available in 2m, 5m, 10m, and 15m to suit any factory floor layout.
EMI/RFI Noise Immunity: High-density shielding prevents interference in motor-heavy areas.
Target Systems & Compatibility:
The PCM-S-0588 is the essential interface for the following Cognex In-Sight 5000 hardware:
- In-Sight 5700 Series: 5705, 5705C (Color).
- In-Sight 5600 Series: 5600, 5603, 5604, 5605.
- Line Scan Systems: All In-Sight 5000 series line scan models.
- I/O Modules: CIO-MICRO and CIO-MICRO-CC expansion units.
Compatible with Cognex Models :
- CCB-84901-0901-02 2m
- CCB-84901-0902-05 5m
- CCB-84901-0903-10 10m
- CCB-84901-0904-15 15m
FAQs:
Q: Does this cable support power to the camera?
A: Yes, it carries both the 24V DC power input from the module to the camera and the high-speed I/O signals back and forth.
Q: Can this cable be used with the CIO-MICRO-CC module?
A: Yes. It is fully compatible with both the standard CIO-MICRO and the CC (CC-Link) version of the I/O module for 5000 series cameras.
Q: Is the PCM-S-0588 compatible with the In-Sight 7000 or 8000 series?
A: No. The In-Sight 5000 series uses an 8-pin M12 interface for this specific I/O module connection, whereas newer 7000 series typically use a 12-pin M12 connector (see our PCM-S-0584 for CCB-PWRIO).
Drawing:
Keywords: