Hirose 12 Pin Right Angle I/O Trigger Cable HR10A-10P-12S
Keywords :
HR10A-10P-12S I/O Cable
Specification :
12 Pin Hirose to Flying Leads
Performance :
PCM-S-0555
Category :
Hirose Trigger Cable
Detail
Hirose 12 Pin Right Angle I/O Trigger Cable HR10A-10P-12S
PCM-S-0555 is a mission-critical Hirose 12 pin right angle trigger cable engineered for high-performance machine vision environments. Featuring an HR10A-10P-12S female connector to open flying leads, it provides a stable link for DC power 12V/24V and low-latency GPIO signals.
The 90-degree right angle design optimizes cable routing in space-constrained enclosures, significantly reducing mechanical stress on the camera port. Constructed with a 24AWG high-flex 12-core conductor, this assembly is built to withstand the rigorous repetitive motion of robotic arms while ensuring flawless signal integrity for Sony, Basler, and JAI GigE cameras.
Specifications:
Part Number | PCM-S-0555 |
Connector Type | Hirose HR10A-10P-12S |
Connector Angle | 90-Degree Right Angle |
Termination | Open Flying Leads |
Conductor Gauge | 24 AWG |
Core Count | 12-Core |
Cable Diameter | 7.3 mm |
Cable Jacket Type | High-Flex Industrial Grade |
Power Support | 12V / 24V DC Systems |
Key Features:
Stable Power Delivery: Reliable DC power transmission (12V/24V) with minimal voltage drop.
Wide Compatibility: Seamlessly integrates with Sony, JAI, Basler, and Toshiba industrial cameras.
Space-Saving Design: Right-angle HR10A connector optimizes cable routing in tight industrial enclosures.
GPIO & Trigger Support: Facilitates precise exposure control and external sensor synchronization for frame-perfect capture.
High-Flex Durability: 24AWG 12-core architecture designed to withstand high-cycle bending in robotic and automated environments.
Applications:
Robotic vision systems: Durable links for 6-axis motion.
Machine vision inspection: Precision I/O for automated QC.
Factory automation production: Unified power and signal routing.
Industrial imaging systems: Critical sync for high-speed image capture and recording.
🛠️ Expert Insight: Signal Integrity & Installation
💡 As an RF engineer, I emphasize shielding effectiveness when dealing with high-density 12-core cables. In industrial environments, EMI (Electromagnetic Interference) can cause "false triggers" or noise in the GPIO lines. The PCM-S-0555 utilizes an optimized internal layout to minimize crosstalk between power cores and signal cores.
💡 Engineer’s Installation Tip: When routing this right angle cable, always respect the dynamic bend radius minimum 10x the OD, approx. 73mm. Forced over-bending near the HR10A-10P-12S housing can lead to conductor fatigue and intermittent signal loss. Additionally, for long cable runs, verify your camera's input voltage requirements to compensate for any DC resistance inherent in 24AWG wiring.
Drawing:
Keywords: