Hirose 12 Pin Male HR10A-10P-12P Power I/O Trigger Cable
Keywords :
HR10A-10P-12P Male Cable
Specification :
GigE Camera Power Flying Cable
Performance :
PCM-S-0562
Category :
Hirose Trigger Cable
Detail
Hirose 12 Pin Male HR10A-10P-12P Power I/O Trigger Cable
PCM-S-0562 is a professional-grade Hirose 12 Pin male to flying leads assembly engineered for high-performance GigE cameras, including Basler, FLIR, and IDS Imaging. This industrial I/O cable facilitates stable DC power delivery 12V/24V, low-latency trigger synchronization, and versatile GPIO control. Utilizing a 24AWG 12-core high-flex conductor architecture with a 7.3mm outer diameter, it is built to survive millions of flex cycles in robotic arms and automated production lines without compromising signal integrity or shielding effectiveness.
Specifications:
Part Number | PCM-S-0562 |
Connector Type | Hirose HR10A-10P-12P |
Termination Type | Tinned Open Ended Flying Leads |
Wire Gauge | 24 AWG |
Conductor Count | 12-Core Industrial High-Flex |
Cable Diameter | 7.3 mm |
Voltage Support | 12V, 24V DC Camera Power Systems |
Key Features:
Stable Power Supply: Provides consistent 12V/24V DC power to prevent camera resets.
HR10A-10P-12P Male Connector: Features the industry-standard push-pull locking mechanism for secure mating.
Trigger Signal Synchronization: Ensures microsecond-level precision for synchronized multi-camera image capture.
GPIO General Purpose I/O: Enables custom integration for external sensor inputs, exposure control, and strobe lighting.
Industrial High-Flex Construction: Built with a 24AWG 12-core jacket designed to withstand continuous bending and mechanical stress in robotics.
Applications:
Machine Vision Systems: Essential for high-speed industrial imaging and sorting.
Robotic Vision Integration: Designed for dynamic cable tracks and robotic arm end-effectors.
Industrial Imaging Control: Facilitates remote monitoring and high-precision quality inspection.
Automated Production Lines: Ideal for synchronized triggering in high-throughput manufacturing environments.
🛠️ Expert Insight: Signal Integrity & Installation Tips
💡 From an RF and interconnect perspective, the shielding effectiveness of a 12-core GPIO cable is paramount to prevent cross-talk between the power lines and the high-speed trigger signals.
1. Noise Mitigation: When wiring the flying leads, ensure the ground drain wire is properly terminated at the controller side to minimize EMI (Electromagnetic Interference).
2. Impedance Stability: For high-frequency trigger pulses, maintain a consistent bend radius (minimum 10x OD) to avoid changes in the dielectric constant, which can lead to signal reflections or timing jitter.
3. Contact Maintenance: The gold-plated pins on the HR10A-10P-12P connector offer low contact resistance. We recommend checking for debris before mating to ensure the integrity of the push-pull locking mechanism in high-vibration factory environments.
❓ FAQs
Q: Can I use this cable for 24V DC power input?
A: Absolutely. The 24AWG copper conductors are rated to handle standard industrial voltages 12V to 24V with minimal voltage drop.
Q: Is the PCM-S-0562 compatible with Basler ace GigE cameras?
A: Yes, the 12-pin Hirose HR10A-10P-12P pinout is the standard interface for Basler ace, FLIR Blackfly, and IDS Imaging GigE series for power and I/O.
Q: What is the benefit of "Flying Leads" over a standard connector?
A: Flying leads (open ends) allow engineers to custom-wire the trigger and GPIO signals directly into PLCs, terminal blocks, or custom control boxes, offering maximum integration flexibility.
Drawing:
Keywords: