Hirose 12 Pin HR10A-10P-12P Right Angle GPIO Trigger Cable
Keywords :
Hirose 12 Pin Trigger Cable
Specification :
HR10A-10P-12P Right Angle Cable
Performance :
PCM-S-0554
Category :
Hirose Trigger Cable
Detail
Hirose 12 Pin HR10A-10P-12P Right Angle GPIO Trigger Cable
PCM-S-0554 is an industrial-grade Hirose 12 Pin Trigger Cable featuring a precision-engineered HR10A-10P-12P right angle connector. This assembly is specifically designed for high-performance imaging systems including Sony, Basler, JAI, and Hitachi cameras.
Utilizing a 24AWG high-flex 12-core cable with a 7.3mm outer diameter, it delivers simultaneous power, GPIO, and trigger signal transmission. The 90 degree orientation provides a critical advantage in space-constrained installations, ensuring signal integrity while reducing mechanical strain on the camera’s I/O port in dynamic robotic environments.
Specifications:
Part Number | PCM-S-0554 |
Connector Type | Hirose 12 Pin Female |
Connector Angle | 90 Degree Right Angle |
Conductor Size | 24 AWG |
Number of Cores | 12-Core High-Flex Wire |
Outer Diameter | 7.3 mm |
Voltage/Current Support | Power + GPIO + Trigger Signals |
Verified Brands | Sony, Panasonic, JAI, Basler, Hitachi |
Key Features:
Wide Compatibility: Seamlessly integrates with Sony, JAI, Basler, and Toshiba industrial cameras.
Multi-Signal Support: Unified solution for DC power supply, GPIO input/output, and precise trigger signals.
Right Angle 90° Design: Space-efficient HR10A-10P-12P connector reduces port stress in tight enclosures.
High-Flex Durability: Industrial-grade 24AWG 12-core wire rated for continuous bending in motion-intensive apps.
Robust Shielding Profile: Engineered to minimize EMI/RFI interference, ensuring clean trigger pulses in noisy factory environments.
Applications:
Factory production lines: Reliable I/O for automated QC.
Robotic vision systems: High-flex leads for 6-axis movement.
Industrial imaging control: Low-latency power and trigger links.
Machine vision inspection: Precision data sync for high-speed sorting.
Space-constrained enclosures: Compact right angle fit for medical imaging devices.
🛠️ Expert Insight: The Right Angle Advantage
💡 As an RF engineer, I often see "standard" straight connectors fail prematurely due to cable memory and constant lateral tension. The PCM-S-0554's right-angle design is not just for aesthetics; it shifts the center of gravity and strain relief point. When installing, always ensure the bend radius does not exceed 10x the cable OD (approx. 73mm) for dynamic applications. This prevents "internal conductor fatigue," a common cause of intermittent trigger signals. Furthermore, the 24AWG core provides lower DC resistance compared to standard 28AWG leads, ensuring stable voltage delivery even over longer cable runs.
FAQs:
Q: Is the HR10A-10P-12P connector pinout compatible with my Basler camera?
A: Yes, PCM-S-0554 follows the standard industrial 12 pin pinout used by Basler, Sony, and JAI.
Q: How many flex cycles is this cable rated for?
A: While ratings vary based on the bend radius, this industrial-grade "High-Flex" cable is designed for millions of cycles in typical robotic drag-chain applications.
Q: Can this cable handle high-frequency trigger signals without noise?
A: Absolutely. The 12-core assembly is shielded to maintain high shielding effectiveness, preventing cross-talk between the power leads and the sensitive trigger lines.
Drawing:
Keywords: