About Us
PRODUCTS CENTER
Guatemala DH40-27S 27 Pin DALSA Xtium Camera Link Trigger Cable
Category:
GuatemalaHirose Trigger Cable
Product Description
DH40-27S 27 Pin DALSA Xtium Camera Link Trigger Cable
PCM-1001 DH40-27S Camera Link Trigger Cable is a 27 Pin trigger cable designed for external I/O connections between Teledyne DALSA Xtium camera acquisition systems and field wiring. The assembly uses a 27 Pin HPC27P female connector with a metal shell and fixing screw on one end, while the opposite end is stripped and tinned for direct connection to external control equipment.
The cable contains 27 conductors plus drain wire shielding and uses a UL2464 26 construction with an approximately 8.0 mm outer diameter. It is intended for applications requiring external camera triggers, strobe control, encoder signals, and other frame grabber I/O connections.
Applications :
Strobe Control
Provides wiring for external strobe or illumination control.
Encoder Feedback
Supports encoder related I/O wiring in machine vision systems.
Camera Triggering
Connects external trigger signals to compatible camera acquisition equipment.
Frame Grabber I/O
Connects external field signals to Teledyne DALSA Xtium and Xtium2 acquisition boards.
Industrial Machine Vision
Used for camera synchronization, trigger control, and external I/O integration in automated inspection systems.
Key Features :
27 Pin Connection
Uses a 27 Pin HPC27P female connector for multi signal I/O connections.
UL2464 Cable Construction
Uses UL2464 26 cable with an approximately 8.0 mm outer diameter and black PVC jacket.
Open Wire Termination
The P2 end is stripped and tinned for direct connection to control cabinets or terminal blocks.
Shielded Cable
The cable construction includes 27 conductors plus drain wire shielding for industrial signal wiring.
Secure Connector Housing
The connector has a metal shell and fixing screw for a secured connection to the mating interface.
Multiple Cable Lengths
Available standard lengths are 3 m, 5 m, 8 m, and 10 m for different machine vision installation distances.
Production Electrical Testing
Each assembly is tested for open circuit, short circuit, and wiring errors, with insulation and contact resistance requirements specified.
Specifications :
| Part Number | PCM-1001 |
| Connector Type | DH40-27S / HPC27P Female |
| Number of Pins | 27 Pin |
| Cable Type | UL2464 26 |
| Conductor | 27C + AB Shield |
| Cable Outer Diameter | Approx. Ø8.0 mm |
| Connector Shell | Metal, nickel plated |
| Fixing Screw | M2 |
| P2 Termination | Stripped and tinned flying leads |
| Stripped Length | 55 ± 5 mm |
| Tinned Length | 5 ± 1 mm |
| Insulation Resistance | ≥10 MΩ, DC 300 V, 0.01 s |
| Contact Resistance | ≤30 mΩ |
| Available Lengths | 3 m, 5 m, 8 m, 10 m |
Drawing :
