About Us
PRODUCTS CENTER
Israel MIL-DTL-5015 3 Pin Female to Female Mil-Spec Cable MS3106-14S-7S
Category:
IsraelMil-Spec Cable Assembly
Product Description
MIL-DTL-5015 3 Pin Female to Female Mil-Spec Cable MS3106-14S-7S
PCM-1002 is a MIL-DTL-5015 MS3106 cable assembly designed for ICP IEPE accelerometer sensors, industrial control equipment, and signal transmission applications. The cable uses two MS3106-14S-7S 3 Pin female circular connectors with identical connector configurations on both ends, providing direct pin to pin connection.
The assembly features an 18AWG 3 core shielded UL20549 cable with aluminum braid shielding and black TPU outer jacket. The internal LDPE molding and external TPU overmold structure provide additional strain relief and protection against repeated bending during installation. The shield connection is maintained through the S contact on both connectors, helping reduce signal interference in sensor applications. PCM-1002 is suitable for industrial equipment, servo systems, vehicle electronics, and vibration monitoring applications requiring MIL-DTL-5015 circular connector interfaces.
Applications :
Vehicle Electronics
Suitable for vehicle mounted sensing and monitoring equipment.
Industrial Sensors
Used for ICP IEPE accelerometer and vibration sensor signal connection.
Industrial Control Systems
Designed for automation equipment using MIL-DTL-5015 circular connectors.
Servo Equipment
Applied in servo control systems requiring shielded sensor cable connections.
Vibration Monitoring Systems
Used for industrial condition monitoring and diagnostic measurement equipment.
Key Features :
Industrial Flexible Cable Jacket
Black TPU outer jacket supports cable routing in industrial equipment environments.
18AWG Shielded Cable Construction
Uses UL20549 cable with 3 cores, aluminum braid shielding, and 5.6 mm outer diameter.
MIL-DTL-5015 MS3106 Connector
Uses MS3106-14S-7S 3 Pin female circular connectors with 5/8 24 UNF thread interface.
3 Pin Direct Wiring Structure
Both ends use the same connector configuration with A, B, C signal pins connected directly.
TPU Overmold Protection
LDPE inner molding and TPU 45P outer molding provide mechanical protection and cable strain relief.
Continuous Shield Connection
The S contact connects the cable shield between both connectors without leaving the shielding floating.
Specifications :
| Part Number | PCM-1002 |
| Connector Model | MS3106-14S-7S |
| Connector Type | MIL-DTL-5015 Circular Connector |
| Connector Gender | Female to Female |
| Pin Count | 3 Pin |
| Cable Length | 2000 mm |
| Cable Construction | UL20549 183C + AB Shield + TPU Jacket |
| Wire Gauge | 18AWG |
| Cable Diameter | Ø5.6 mm |
| Thread Specification | 5/8 24 UNF |
| Shield Connection | S Contact Connected Between Both Ends |
| Insulation Resistance | ≥10 MΩ, DC 300V |
| Contact Resistance | ≤3Ω |
Drawing :
FAQs :
What connector does this MIL Spec cable use?
The cable uses MS3106-14S-7S 3 Pin female circular connectors from the MIL-DTL-5015 series.
Is the cable shield connected between both connectors?
Yes. The cable shield is connected to the S contact on both ends to maintain continuous shielding.
What is the difference between PCM-1002 and PCM-1003?
PCM-1002 uses straight connectors on both ends, while PCM-1003 uses a straight connector on one side and a 90° right angle connector on the other side.
What is the PCM-1002 MS3106 cable assembly used for?
PCM-1002 is designed for ICP IEPE accelerometer sensors, vibration monitoring equipment, and industrial control systems using MIL-DTL-5015 connectors.