About Us
PRODUCTS CENTER
NMEA 2000, National Marine Electronics Association 2000, is a communication protocol standard for connecting marine electronic devices, such as GPS receivers, autopilots, wind speed and direction sensors, depth sonar, and other types of sensors and controllers. This protocol allows these devices to share data such as navigation, location, depth, speed, wind speed and direction, etc.
NMEA 2000 Mini Micro Tee connector Widely used in sensor and actuator, motor, rail , ship radar, field bus for DeviceNet, for NMEA 2000 open system and other application fields
NMEA 2000, National Marine Electronics Association 2000, is a communication protocol standard for connecting marine electronic devices, such as GPS receivers, autopilots, wind speed and direction sensors, depth sonar, and other types of sensors and controllers. This protocol allows these devices to share data such as navigation, location, depth, speed, wind speed and direction, etc.
NMEA2000 Micro-Change M12 ， M12 Micro-C, DeviceNet Mini-Change 7/8", 7/8" Mini-C supplier manufacturer
7/8 Connector 5 Pin Field Wireable for Fieldbus Systems, Field-Wireable Connector, 7/8" Female, Straight, For use in DeviceNet and CANopen applications as well as for power supply, 5-pin, Screw-clamp terminal, Metal coupling nut
Mini-Change Field Attachable Male Connector has 5 poles, cable diameter of 5-12 mm for accommodating the AWG 15-24 cables. It is rated to work safely at 600V AC/DC
DeviceNet Mini-C Bulkhead Feed-through Receptacles are used to create watertight pass throughs for Mini-C cables.
Premier Cable make this Mini-Change termination resistor with 120 ohm Resistor 1/4W or 1/2W , the Resistor is on Pin 4 and Pin 5, The other 3 pins are not connected, this model also compatible with Molex 1300390370 and Brad Connectivity DN100, it is mostly used at the end of the trunk line or NMEA2000 networks
Termination resistors are used to terminate both ends of the trunk line, Premier Cable made DeviceNet Mini Change Terminator Resistor Male or Female can be used at the end of a run of Mini-C DeviceNet cable, Share data between NMEA 2000 devices with current Up to 4 AMPS