DIN 5 Pin Male to Male Right Angle MIDI Cable
Keywords :
Right Angle MIDI Cable
Specification :
DIN 5 Pin Extension Cable
Performance :
PCM-0937
Category :
MIDI DIN Cable
Detail
DIN 5 Pin Male to Male Right Angle MIDI Cable
PCM-0937 incorporates DIN 5 Pin male connectors with 90-degree cable exits at both ends, reducing rear clearance requirements in racks, control panels, and densely populated equipment layouts. The assembly uses 24AWG UL2464 cable with a 4.8mm jacket diameter and straight-through pin assignment across all five contacts. Gold-flashed pins and a nickel-plated metal housing provide consistent electrical contact and mechanical durability. Dual-molded strain relief protects the cable termination area from bending and tensile loads encountered during installation and service. Typical applications include MIDI controllers, audio processors, industrial control equipment, communication devices, and instrumentation systems equipped with DIN 5 Pin interfaces.
Specifications :
| Part Number | PCM-0937 |
| Connector A | DIN 5 Pin Male, Right Angle |
| Connector B | DIN 5 Pin Male, Right Angle |
| Pin Configuration | 5 Pin Straight Through |
| Shield Connection | Shield Connected End to End |
| Cable Type | UL2464 |
| Wire Gauge | 24AWG |
| Cable OD | 4.8mm |
| Cable Length | 1830 ±30mm |
| Contact Plating | Gold Flash |
| Shell Plating | Nickel Plated |
| Inner Mold Material | LDPE |
| Outer Mold Material | PVC 45P |
| Cable Color | Black |
| Insulation Resistance | ≥10MΩ @ DC 300V |
| Contact Resistance | ≤3Ω |
| Operating Temperature | 5°C to +75°C |
Key Features :
UL2464 Cable Construction
24AWG conductors enclosed within a 4.8mm jacket balance flexibility and mechanical protection for routine equipment interconnection.
Pin-to-Pin Signal Continuity
All five conductors maintain straight-through wiring from connector to connector, supporting accurate signal transmission without pin reassignment.
Dual-Molded Strain Relief Structure
LDPE inner molding and PVC outer overmolding reinforce cable exits and improve resistance to pulling, bending, and long-term mechanical stress.
Gold-Flashed Contact System
Machined contacts with gold-flash plating help maintain reliable electrical contact and minimize signal degradation during repeated insertion cycles.
Right Angle DIN Interface
Dual 90-degree DIN 5 Pin connectors reduce cable protrusion and improve installation flexibility in racks, equipment cabinets, and tightly packed device layouts.
Reliable Electrical Verification Standards
Each assembly undergoes continuity, short-circuit, and miswiring inspection together with insulation resistance and contact resistance verification before shipment.
Optimized for Space-Constrained Equipment Installations
The low-profile right-angle connector geometry assists cable management around mixers, MIDI controllers, industrial panels, communication equipment, and test systems where rear clearance is limited.
Applications :
Industrial Control Systems
Connect legacy DIN-interface controllers, operator panels, and industrial automation equipment.
MIDI Controllers
Interconnect MIDI keyboards, synthesizers, sequencers, and digital music production equipment.
Communication Devices
Enable signal routing in communication hardware utilizing standard DIN circular connector interfaces.
Audio Processing Equipment
Support signal transmission between mixers, sound modules, audio interfaces, and rack-mounted audio devices.
Test and Measurement Instruments
Provide dependable interconnection for laboratory equipment, monitoring systems, and specialized instrumentation requiring DIN 5 Pin communication links.
Drawing :
Keywords: