6-Way XT30 Female Power Distribution Board
Keywords :
XT30H 1 to 6 Adapter
Specification :
XT30 Multi Port Adapter
Performance :
PCM-0983
Category :
XT30
Detail
6-Way XT30 Female Power Distribution Board Overmolded Adapter
PCM-0983 XT30 Power Distribution Board Overmolded Adapter integrates one XT30H-M input connector with six XT30H-F output sockets in a compact parallel power distribution structure. The board-style adapter routes the positive and negative power paths from a single battery source to six equivalent XT30 output ports through UL1569/1007 16AWG jumper wiring.
The integrated PVC overmolded housing fixes the XT30 connector arrangement and supports mechanical installation in compact electronic systems. With a fixed 1-to-6 power expansion layout, this adapter simplifies DC power distribution for RC models, UAV platforms, robotics equipment, battery-powered devices, and laboratory testing applications.
Key Features :
Integrated Overmolded Housing
PVC injection molding secures connector alignment and protects internal wiring within a rigid adapter body.
16AWG Internal Power Routing
UL1569/1007 16AWG jumper wiring maintains compact internal power distribution inside the molded structure.
Six-Port Power Expansion
Six female XT30 sockets create multiple DC output channels from a single battery or power supply connection.
Parallel DC Power Architecture
All output ports share identical positive and negative power paths without independent switching or signal control.
XT30 Interface Layout
One XT30H-M power input is distributed to six XT30H-F output ports through a fixed parallel connection structure.
Mechanical Mounting Structure
The distribution board includes mounting holes and spaced output ports for equipment integration and fixture installation.
Compact Multi-Device Integration
The adapter reduces loose wiring complexity when connecting multiple XT30-powered modules in limited installation areas.
Applications :
LED and Portable Electronics
Supports multi-device power branching in compact battery-powered equipment.
Laboratory Testing Platforms
Used as a reusable XT30 power distribution interface for prototype evaluation and electrical testing.
RC Battery Systems
Power expansion interface for connecting multiple electronic modules from one LiPo battery source.
Robotics Platforms
Applied in mobile robots and small automation equipment requiring distributed DC power connections.
UAV Power Distribution
Used in drone platforms requiring multiple XT30-compatible power outputs for flight controllers and accessories.
Specification :
| Part Number | PCM-0983 |
| Input Connector | XT30H-M Male Plug |
| Output Connector | XT30H-F Female Socket |
| Output Quantity | 6 Ports |
| Input Connector Dimension | 18.5 × 12mm |
| Output Base Length | 96mm |
| Output Base Width | 18mm |
| Output Port Spacing | 5.8mm Center Distance |
| Internal Wire | UL1569 / UL1007 Jumper Wire |
| Wire Gauge | 16AWG |
| Mounting Hole Diameter | Φ3.5mm |
| Positioning Hole Diameter | Φ5.0mm |
| Outer Housing Material | Black PVC 45P MA-001 |
| Housing Structure | Integrated Overmolded Assembly |
Drawing :
FAQs :
Q1: Does the adapter include fuse protection?
No. PCM-0983 is a passive power distribution device without fuse, switching, or current limiting functions.
Q2: Why choose an overmolded XT30 adapter instead of loose splitter cables?
The overmolded structure maintains connector positioning, reduces wiring complexity, and provides a fixed multi-port installation format.
Q3: Are the six XT30 outputs independently controlled?
No. All six XT30H-F ports are electrically connected in parallel. The adapter distributes the same battery voltage to every output channel.
Keywords: