5.5x2.1mm DC Jack Panel Mount Extension Cable
Keywords :
DC5521 Panel Mount Power Cable
Specification :
5.5x2.1mm DC Extension Cable
Performance :
PCM-0384
Category :
Round Panel Mount Cable
Detail
5.5x2.1mm DC Jack Panel Mount Extension Cable
PCM-0384 DC5521 Panel Mount Power Extension Cable features a straight-through 5.5×2.1mm DC power interface transitioning from an internal DC plug to an external threaded panel mount DC jack. The connector housing adopts a brass nickel-plated contact structure with molded strain relief boots on both ends to reduce bending stress during installation. The panel-side jack integrates an external thread and is secured with a PVC locking nut for enclosure mounting.
Internal wiring uses a 20AWG 2-core UL2464 cable, supporting stable low-voltage power transmission for 12V/24V systems. Electrical path is limited to center-positive and shell-negative conductors with no signal processing. The assembly is intended for chassis-integrated DC power access in automotive, industrial, and embedded electronic equipment.
Specifications :
| Part Number | PCM-0384 |
| Product Type | DC5521 Panel Mount Power Extension Cable |
| Connector A | DC5521 Plug 5.5×2.1mm Male |
| Connector B | DC5521 Jack Panel Mount Threaded Female |
| Cable Type | UL2464 20AWG 2-Core |
| Cable OD | 4.6mm |
| Conductor | Copper, 20AWG |
| Wiring Method | Straight-through (Center + / Shell -) |
| Rated Voltage | Low Voltage DC (12V / 24V systems typical) |
| Contact Material | Nickel-plated brass |
| Strain Relief | Overmolded PVC boot (both ends) |
| Locking Method | Threaded panel + PVC nut |
| Length | 300 ±15mm |
| Insulation Test | DC 300V, ≥10MΩ |
| Contact Resistance | ≤3Ω |
Key Features :
Molded Strain Relief Construction
Overmolded PVC boots on both connectors reduce mechanical stress at cable-to-connector junctions.
Threaded Panel Retention System
External-thread jack with locking nut enables stable chassis mounting in vibration-prone environments.
20AWG Power Conductor Design
Thick-gauge copper conductors reduce voltage drop under continuous 12V/24V power transmission loads.
Industrial Electrical Stability
Full continuity, insulation, and contact resistance testing ensures stable power delivery in embedded systems.
Straight Power Path Architecture
Center-positive and shell-negative wiring maintains direct DC power routing without conversion or regulation circuitry.
DC Interface Standardization
5.5×2.1mm DC5521 connectors ensure compatibility with common low-voltage power adapters and embedded power inputs.
Applications :
LED Systems
Power extension for LED strips and lighting modules.
Embedded Electronics
Panel-access DC input for internal device power routing.
Automotive Electronics
Dashboard or in-vehicle power access points for 12V systems.
Security & Surveillance Systems
Stable DC supply routing for cameras, DVRs, and monitoring devices.
Industrial Equipment
Chassis-mounted DC power interface for control units and instrumentation panels.
Outdoor & Infrastructure Installations
Panel-mounted power entry for sealed enclosures in harsh or vibration-prone environments.
Drawing :
Keywords: