4 Port XT60 Power Distribution Hub
Keywords :
XT60 Power Distribution Hub
Specification :
XT60 1 to 4 Connector
Performance :
PCM-0980
Category :
XT60
Detail
4 Port XT60 Power Distribution Hub
PCM-0980 4 Port XT60 Power Distribution Hub, 1 Male to 4 Female is a parallel DC power splitter designed to distribute power from one XT60 male connector to four XT60 female ports. The compact hub structure enables multiple XT60-compatible devices to share a single battery power source while maintaining organized wiring and reliable electrical connection. Built with XT60H connectors, 14AWG internal wiring, LDPE insulation, and reinforced PVC protection, it is suitable for RC models, UAV systems, robotics, portable power equipment, and custom DC power distribution applications.
Specifications :
| Product Name | 4 Port XT60 Power Distribution Hub |
| Part Number | PCM-0980 |
| Connector Configuration | 1 Male to 4 Female |
| Input Connector | XT60H-M Male Plug |
| Output Connector | XT60H-F Female Socket × 4 |
| Circuit Structure | 1 Input / 4 Output Parallel Distribution |
| Connector Type | XT60 High Current Connector |
| Wire Type | UL1569 / UL1007 |
| Wire Gauge | 14AWG |
| Insulation Material | Transparent LDPE |
| Overmold Material | Black PVC 45P |
| Input Connector Width | 24.5mm |
| Main Body Length | 92mm |
| Main Body Width | 20.5mm |
| Output Port Spacing | 6.35mm |
| Mounting Hole Diameter | Φ4.50mm |
| Counterbore Diameter | Φ8.00mm |
| Insulation Resistance | ≥10MΩ @ DC300V, 0.01s |
| Contact Resistance | ≤30mΩ |
Key Features :
High Current 14AWG Wiring
Integrated 14AWG conductors provide reliable current transfer for battery-powered applications.
Reinforced Electrical Protection
LDPE insulation and PVC overmold protection isolate internal wiring while improving mechanical durability.
XT60H Connector Interface
Uses XT60H male and female connectors with polarized housing design to ensure correct mating orientation.
Compact Multi-Port Layout
Four output ports are arranged in a compact configuration with optimized spacing for easier connector access.
XT60 1-to-4 Power Distribution
Splits one XT60 power input into four independent XT60 female output ports for parallel DC power distribution.
Stable Parallel Power Distribution
All output ports share the same electrical bus, providing consistent voltage distribution for multiple connected XT60 devices.
Applications :
Portable Power Equipment
Suitable for battery boxes, mobile power stations, and outdoor DC power solutions.
Lithium Battery Applications
Used for expanding XT60 battery outputs in custom battery packs and charging systems.
DIY DC Power Projects
Applicable to custom power distribution setups requiring multiple XT60 connection points.
RC Battery Systems
Used for distributing battery power to multiple XT60-equipped RC devices and electronic modules.
FPV Drone Platforms
Provides centralized power expansion for flight controllers, ESCs, cameras, and auxiliary electronics.
Robotics Systems
Supports power distribution between batteries, motor controllers, sensors, and embedded control units.
Drawing :
Keywords: