0.8mm Pitch SCSI SDR 26 Pin Camera Link Connector
Keywords :
SDR 26 Pin Camera Link Connector
Specification :
Mini Camera Link Connector
Performance :
PCM-TAT-0006
Category :
SCSI Cable
Detail
0.8mm Pitch SCSI SDR 26 Pin Camera Link Connector
PCM-TAT-0006 is an SDR 26 Pin Camera Link connector designed for industrial camera and machine vision applications. The connector uses a compact 0.8mm pitch, 26 position SDR interface for high density signal connections between cameras and image acquisition equipment such as frame grabbers.
The cable-side connector uses a screw locking structure with 2 × M2 flat-head screws to provide mechanical retention during equipment operation. Its compact profile is suited to industrial camera systems where connector space is limited.
Applications :
- Industrial Cameras
- Camera Link Frame Grabbers
- Factory Automation Equipment
- Industrial Image Acquisition Systems
- High Speed Machine Vision Cameras
- Industrial Machine Vision Inspection Systems
- Automated Optical Inspection (AOI) Equipment
- Semiconductor and Electronics Inspection Equipment
Features :
- 0.8mm Contact Pitch
- 26 Position SDR Interface
- M2 Screw Locking Retention
- Low Resistance Signal Contact
- Wide Operating Temperature Range
- Compact Cable Side Connector Design
- Designed for Camera Link Machine Vision Connections
Specifications :
| Product Number | PCM-TAT-0006 |
| Connector Type | SDR 26 Pin |
| Full Name | Shrunk Delta Ribbon 26 Pin |
| Application Interface | Camera Link |
| Number of Positions | 26 Pin |
| Contact Pitch | 0.8mm |
| Locking Method | 2 × M2 Flat-Head Screws |
| Mounting Hole Diameter | Φ7.00 ± 0.35 mm |
| Rated Current | 0.5A |
| Withstand Voltage | AC 125V |
| Contact Resistance | ≤35mΩ |
| Insulation Resistance | ≥70MΩ |
| Operating Temperature | -55°C to +85°C |
Drawing :
FAQs :
Does PCM-TAT-0006 use screw locking?
PCM-TAT-0006 uses two M2 flat-head screws for connector retention.
What is an SDR 26 Pin connector used for?
It is mainly used for industrial cameras, Camera Link cables, frame grabbers and machine vision image acquisition systems.
Can PCM-TAT-0006 be used for machine vision cameras?
Yes. Its 26 position, 0.8mm pitch SDR interface is suited to Camera Link connections used in industrial cameras and machine vision equipment.
What is the rated current of PCM-TAT-0006?
The specified rated current is 0.5A. This connector should therefore be positioned primarily as a signal/data interface, rather than a high current power connector.
What is the pitch of an SDR 26 Pin connector?
The SDR 26 Pin interface uses a 0.8mm pitch contact arrangement. This compact pitch allows a higher density connector structure than larger ribbon interfaces such as MDR.
Keywords: